Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!ncrlnk!wright!eve!amercer
From: amercer@eve.wright.edu (Art Mercer)
Newsgroups: comp.sys.amiga.tech
Subject: AT Bridge can't find lib.
Message-ID: <840@thor.wright.EDU>
Date: 14 Nov 89 21:21:53 GMT
Sender: news@wright.EDU
Reply-To: amercer@eve.UUCP (Art Mercer)
Distribution: usa
Organization: Wright State University, University Computing Services
Lines: 36

Got a couple of Bridge board question.

We have three A2500's with the AT Bridge board & Janus v2 software.
From time to time when attempting to bring up the PC software, we will
get a "library not found" error message.  The only way we've found
to get the sucker working is a reboot of the Amiga.  This is happening
with all 3 machines.  I got the gumption to post this cause I just had
a student in my office with a brand new A2000 that's (mis)behaving in 
the same fashion.  This problem has seemed to occur randomly, so we
haven't been able to trace a common cause.

Any clues?

The second minor nasty occurs with using the Amiga PC services.
We have 3Com 3C503 ethernet boards witth start PROMS on the PC
side and after (re)-booting, the PC side cannot find the Amiga
services.  Says they're not running.  If, HOWEVER, we do a DIR a:
all is well!  Since we have a work around for this one it's more
of an inconvience than anything else, but it doesn't look good
when the tinted blue bosses are around...

Hopefully CATS is listening.

Art Mercer
Associate Director, Academic Computing Resources
040T Library Annex
Wright State University
Col Glenn Hwy.
Dayton, OH 45435

Reply to above or

BITNET:  amercer@wsu.bitnet

---