Path: utzoo!yunexus!lethe!torsqnt!jarvis.csri.toronto.edu!mailrus!wuarchive!cs.utexas.edu!usc!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!jato!mars!baalke From: baalke@mars.jpl.nasa.gov (Ron Baalke) Newsgroups: comp.sys.amiga.tech Subject: Re: BridgeCard Keywords: running under 1.3 Message-ID: <2195@jato.Jpl.Nasa.Gov> Date: 16 Nov 89 22:59:38 GMT Article-I.D.: jato.2195 References: Sender: news@jato.Jpl.Nasa.Gov Reply-To: baalke@mars.UUCP (Ron Baalke) Organization: Jet Propulsion Laboratory, Pasadena, CA. Lines: 18 In article armhold@topaz.rutgers.edu (George Armhold) writes: > >I've just installed an IBM ethernet card in one of the PC slots on our >lab's 2000 so we finally have a need for the BridgeCard. I can get it >to work fine under 1.2 but it has problems with 1.3. Is there some >kind of patch or new (Janus?) library I need? Has there been an >update to the BridgeCard software lately? > You didn't say which Bridgecard you had (the XT or AT). I have an XT Bridgecard running under 1.3 with no problems. Maybe the IBM ethernet card is interfering with your Bridgecard. Ron Baalke | baalke@mars.jpl.nasa.gov Jet Propulsion Lab M/S 301-355 | baalke@jems.jpl.nasa.gov 4800 Oak Grove Dr. | Pasadena, CA 91109 |