Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!gryphon!pnet02!lampi
From: lampi@pnet02.gryphon.com (Michael Lampi)
Newsgroups: comp.sys.apollo
Subject: Re: Connecting a Terminal to DN3500
Message-ID: <22169@gryphon.COM>
Date: 13 Nov 89 00:20:21 GMT
Sender: root@gryphon.COM
Organization: People-Net [pnet02], Redondo Beach, CA.
Lines: 18

Have you tried using the Aegis TCTL command (TCTL -line # -speed <baud>) to
set the speed? Yes, this isn't UNIX, but at least see if your SIO port is
working. Also, have you determined if your terminal needs flow control
(XON/XOFF)? You might want to set (Aegis, again) -INSYNC and -HOSTSYNC using
the aforementioned TCTL command.

Finally, are you using the 1-to-3 converter cable to separate the three SIO
ports from the single DB-25 connector? Perhaps you are referring to the wrong
SIO port in your Unix stuff.

Anyway, who offers *real* UNIX, and what IS *real* Unix???!?

Michael Lampi
Michael Lampi               MDL Corporation   213/782-7888   fax 213/782-7927

UUCP: {ames!elroy, <routing site>}!gryphon!pnet02!lampi
INET: lampi@pnet02.gryphon.com
"My opinions are that of my corporation!"