Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!udel!udccvax1!sun.acs.udel.edu!gdtltr
From: gdtltr@sun.acs.udel.edu (Gary D Duzan)
Newsgroups: comp.sys.atari.8bit
Subject: Re: Help needed with Kermit
Message-ID: <5297@sun.acs.udel.edu>
Date: 15 Nov 89 18:19:52 GMT
References: <8911150803.AA02732@ucbvax.Berkeley.EDU>
Reply-To: gdtltr@sun.acs.udel.edu (Gary D Duzan)
Organization: Galadrim (really a disorganization)
Lines: 21


   Well, to use Kermit65 you have to be able to control the modem through
the data stream. In other words, you can't rely on XIO commands & such.
Most commonly used for this purpose is the Hayes command set. I have seen
a handler for the 1030/XM301 to emulate a subset of the Hayes command set,
but never anything for the MPP modems. Until something like that turns up for
the MPP, it would be difficult to get it to work with most terminal programs
unless they have MPP support built in.

                                        Gary Duzan
                                        Time  Lord
                                    Third Regeneration
                                 Atari Enthusiast Extreme




-- 
      _o_                                                            _o_
    [|o o|]        "Two hearts are better than one." -- Yes        [|o o|]
     |_O_|      "Don't listen to me; I never do." -- Doctor Who     |_O_|