Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!apple!uokmax!occrsh!att!cbnewsh!twb
From: twb@cbnewsh.ATT.COM (thomas.w.beattie)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Can ramdisk & LIM memory co-exist on same expansion board?
Message-ID: <5635@cbnewsh.ATT.COM>
Date: 9 Nov 89 15:30:55 GMT
References: <1989Nov7.223157.4619@sj.ate.slb.com>
Reply-To: twb@cbnewsh.ATT.COM (thomas.w.beattie,ho,)
Distribution: na
Organization: AT&T Bell Laboratories
Lines: 19

In article <1989Nov7.223157.4619@sj.ate.slb.com> poffen@sj.ate.slb.com (Russ Poffenberger) writes:
>>In article <5484@cbnewsh.ATT.COM> twb@cbnewsh.ATT.COM (thomas.w.beattie,ho,) writes:
>>I use an AT&T PC6300 Plus (80286 based) PC with a 2Meg expanded memory card.
>>I use the AEMM.SYS driver to access it.
>           ^^^^^^^^
>
>Sounds like this may be an AT&T supplied driver, not much use if you don't
>have an AT&T computer.

Each board vendor should supply the equivalent driver.
I believe the AST driver is called REMM??.SYS.

I have also used one vendor's driver on a different vendor's board
with varying degrees of success.

---
Tom Beattie
att!hoqaa!twb
t.w.beattie@att.com