Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!rutgers!texbell!texsun!newstop!sun!enterprise!kirk
From: kirk%enterprise@Sun.COM ('Captain' Kirk DeHaan)
Newsgroups: comp.sys.ibm.pc
Subject: Re: WX1
Message-ID: <127890@sun.Eng.Sun.COM>
Date: 14 Nov 89 22:50:07 GMT
References: <45@qmsseq.imagen.com>
Sender: news@sun.Eng.Sun.COM
Lines: 19

From article <45@qmsseq.imagen.com>, by pipkins@qmsseq.imagen.com (Jeff Pipkins):
> I don't know the exact debug commands for a low-level format on the XT
> WD controller, but I do know that the address of the ROM on the card
> usually starts at C800:0000.  You might try jumping there (-g =C800:0000)
> but I think you probably have to have a function number in AH or AX to
> tell it what to do.  Hope this helps.
> 
Both controllers I have used have presented a menu.  You only need to
jump to C800:0000 as mentioned previously.


********************************************************************
* 'Captain' Kirk DeHaan		|	"There's a lot to be said  *
*  Sun Microsystems Inc.	|	  For a blow to the head"  *
*				|				   *
*  net - kirk@sun.com		|	      Blue Oyster Cult     *
*  packet - n6sxr.ampr.org	|				   *
*				|				   *
********************************************************************