Path: utzoo!attcan!sobmips!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!AERO4.LARC.NASA.GOV!blbates
From: blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS294 x42854")
Newsgroups: comp.sys.sgi
Subject: Re:  Contour plots
Message-ID: <8911160032.AA24144@aero4.larc.nasa.gov>
Date: 15 Nov 89 21:32:50 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 16


   You might be able to get an old version of PLOT3D.  This program
does all sort of contouring on the IRIS.  This software was written
at Ames Research Center.  The new versions are for US disemination
only.  You could send mail to pierce@prandtl.nas.nasa.gov to see if
you can get a new version, if not he may be able to tell you how to
get an old version of it.  The most recent version is 3.6
I hope that helps.
--

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 294
	Hampton, Virginia  23665-5225
	(804) 864-2854
	E-mail: blbates@aero4.larc.nasa.gov or blbates@aero2.larc.nasa.gov