Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!cs.utexas.edu!rice!sun-spots-request
From: poffen@sj.ate.slb.com (Russ Poffenberger)
Newsgroups: comp.sys.sun
Subject: Re: SMD on the SPARCstation
Keywords: Hardware
Message-ID: <2817@brazos.Rice.edu>
Date: 1 Nov 89 21:20:08 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 28
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 187, message 5 of 18

In article <2448@brazos.Rice.edu> weber@cg-atla.samsung.com (Jeff Weber) writes:
>X-Sun-Spots-Digest: Volume 8, Issue 176, message 3 of 13
>
>In article <2274@brazos.Rice.edu> lll-lcc!rzh@uunet.uu.net (Roger Hanscom) writes:
>>X-Sun-Spots-Digest: Volume 8, Issue 166, message 23 of 26
>>
>>Here's an interesting comment I picked up the other day.  A third party
>>peripherals vendor claimed to have put one of the new 1Gbyte SMD drives
>>   STUFF DELETED...
>
>Has anyone figured out how to BOOT the SMD-4/753/7053 from the boot ROM?
>
>I've got it to work via the boot on the first install tape but I haven't
>got it to work directly from the ROM monitor.  
>

I have heard (but not verified, I don't have one) that the boot rom on the
330 doesn't boot an SMD disk. It does work on a 370 though (I have one of
those). No big problem though, just boot off scsi and let vmunix finish
booting off the SMD. Or you could just boot entirely off the scsi and use
the SMD for data or additional swap (swapon). This doesn't require rom
support.  There are other considerations to putting an XY753 in a 330. I
mentioned them on this newsgroup recently. If anyone missed it, e-mail me
and I will give you the latest scoop. Plus I have info on how to add
memory without buying sun's expensive memory boards.  

Russ Poffenberger
DOMAIN: poffen@sj.ate.slb.com        UUCP: {uunet,decwrl,amdahl}!sjsca4!poffen