Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!shadooby!samsung!cs.utexas.edu!rice!sun-spots-request
From: scott%prism@gatech.edu
Newsgroups: comp.sys.sun
Subject: Using CDC Wren Drives on 3/80s
Keywords: Hardware
Message-ID: <2828@brazos.Rice.edu>
Date: 1 Nov 89 18:13:03 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 9
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 187, message 16 of 18

I have been given the opportunity to replace my 3/50 with a 3/80. However,
I currently use a Wren III (94161-155) on my 3/50 and want to make sure
that it will work with the 3/80. Does anyone currently use a Wren III on a
3/80 and if so, what problems did you have making it work? Someone else in
my department uses a 3/50 with a half-height Wren V (the 209MB
model)...any word on this configuration?

Thanks in advance,
Scott