Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!ucsfcgl!cca.ucsf.edu!wet!johnk From: johnk@wet.UUCP (John E. Kemker, III) Newsgroups: comp.terminals Subject: Re: VT220 keys question Message-ID: <763@wet.UUCP> Date: 11 Nov 89 16:27:34 GMT References: <12900001@osiris.cso.uiuc.edu> Reply-To: johnk@wet.UUCP (John E. Kemker, III) Organization: VA Medical Center, Atlanta, Georgia Lines: 17 In article <12900001@osiris.cso.uiuc.edu> funk@osiris.cso.uiuc.edu writes: >In Vt100 mode, function key f11 sends Esc >In Vt220 mode, it sends CSI17~ (vt200 definition). > >Does the VT220 have a separate Esc key? Am I right in telling them >that their mapping is a bit flawed? > The LK201 keyboard [the one used on the VT220 and VT320 terminals] have no seperate key. Both of them have an f11 key that can be configured [using setup] to send either CSI17~ or . Does your terminal emulator remap the REGULAR key on your PC keyboard? They might be able to use that. -- US Snail: | The above opinions are not necessarily those of | John E. Kemker, III | The Department of Veteran Affairs. | 2957 Dunnington Cir. |-------------------------------------------------| Chamblee, GA 30341 | My opinions are my own. Nobody else wants them! |