Path: utzoo!censor!geac!jtsv16!uunet!mailrus!tut.cis.ohio-state.edu!gem.mps.ohio-state.edu!usc!csun!srhqla!quad1!avatar!kory
From: kory@avatar.UUCP (Kory Hamzeh)
Newsgroups: comp.unix.xenix
Subject: Re: Trailblazer (Plus PC)
Summary: The PC Telebit Doesn't have NVRAM.
Message-ID: <117@avatar.UUCP>
Date: 10 Nov 89 23:56:33 GMT
References: <3886@questar.QUESTAR.MN.ORG>
Organization: Kory Hamzeh, Canoga Park, Ca, USA
Lines: 22

In article <3886@questar.QUESTAR.MN.ORG>, jeff@questar.QUESTAR.MN.ORG (Jeff Holmes) writes:
> 
> 		# dialTBIT -z /dev/tty1A 19200
> 
> 	I then check the registers and it appears that NOTHING
> 	has been changed.  I think it might be that the &W command
> 	isn't being recieved <<successfully>> though it IS in the
> 	command string being issued by dialTBIT.




The Telebit PC Internal Modem doesn't have Non-Volatile Ram to store
configuration data. The &W is simply ignored. This fact it stated in 
the manual AND in the quick reference guide. RTFM.



-- 
-------------------------------------------------------------------------------
Kory Hamzeh			    UUCP:     ..!uunet!psivax!quad1!avatar!kory
				    INTERNET: avatar!kory@quad.com