Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!rice!uw-beaver!uw-entropy!quick!thebes!jwc
From: jwc@Thalatta.COM (Bill Campbell Guest account)
Newsgroups: comp.unix.xenix
Subject: Re: SCSI HOST ADAPTOR
Message-ID: <2164@thebes.Thalatta.COM>
Date: 14 Nov 89 04:54:17 GMT
References: <2458@cadovax.UUCP>
Reply-To: jwc@Thalatta.COM (Bill Campbell Guest account)
Organization: Thalatta Corporation, Bellevue WA
Lines: 17

In article <2458@cadovax.UUCP> tzung@cadovax.UUCP () writes:
>I am planing to integrate a SCSI disk into my system, a 20MHz 386 box with
>2MB memory running XENIX.   I already have a SCSI disk, the problem now
>is which SCSI Host Adaptor to buy.

We have been using the Adaptec 1540 controllers for about 18 months
now with very good results.

The configuration is typically an Adaptec controller with 170Meg
Quantum Hard drives running Xenix 2.2.4 on Tandy 4000s.  The
Tandy SCSI version was available some time before SCO's GT.


....microsoft--\					Bill Campbell; Celestial Software
...uw-beaver-----!thebes!camco!bill	6641 East Mercer Way
....fluke------/					Mercer Island, Wa 98040
....hplsla----/						(206) 232-4164