Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!husc6!bu-cs!mirror!necntc!necis!puck!asp
From: asp@puck.UUCP (Andy Puchrik)
Newsgroups: comp.unix.xenix
Subject: Re: How to choose SCSI
Message-ID: <935@puck.UUCP>
Date: 16 Nov 89 12:46:03 GMT
References: <7100034@adaptex>
Organization: Moonlight Systems, Concord, MA
Lines: 15

In article <7100034@adaptex>, neese@adaptex.UUCP writes:
>   SCSI devices, for the most part, have programmable buffer full/empty ratios
> stored in a mode page of the device.  NOTE:  Not all devices allow a user to
> reprogram these parameters.  These parameters affect when the device should and
> should not, get on the SCSI bus for a data transfer.  Typically, a SCSI device

	Does the Adaptec SCSI controller support both disks and tapes?
How many devices can it support?  Ideally, I'd like to have two disks
and one tape driver.  What kind of performance do you get with an Archive
Viper with a SCSI interface?

-- 
 Andy Puchrik
 Moonlight Systems			...!decuac!necntc!necis!puck!asp
 Concord, MA 01742			asp@puck.UUCP