Xref: utzoo comp.lsi:886 comp.lsi.cad:324 Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!rutgers!soleil!slopoke.semi.harris-atd.com!thrush!del From: del@thrush.semi.harris-atd.com (Don Lewis) Newsgroups: comp.lsi,comp.lsi.cad Subject: Re: Need help on Silos input commands ... Message-ID: <1989Nov21.171236.11655@semi.harris-atd.com> Date: 21 Nov 89 17:12:36 GMT References: <10648@venera.isi.edu> Sender: news@semi.harris-atd.com Reply-To: del@thrush.semi.harris-atd.com (Don Lewis) Distribution: usa Organization: Harris Semiconductor, Melbourne, FL Lines: 22 In article abair@turbinia.oakhill.uucp (Alan Bair) writes: > .CLKIN .CLK 0 S1 500 S0 3000 S1 3500 S0 .REP 500 >The signal CLKIN(I don't think that 1st "." should be there) is driven by >the source with the described waveform. The waveform is defined by pairs >of TIME and Strength/Level descriptions. The .REP 500 indicates that the >pattern is to be repeated 500 times. I can't remember if the entire pattern >is repeated or just part of the sequence is used. Not quite. The .REP 500 means that at time 3500 the pattern repeats starting at time 500 in the initial sequence. This repitition continues indefinitely. > >Alan Bair >SPS CAD Logic Simulation & Test >Motorola, Inc. Austin, Texas >...!cs.utexas.edu!oakhill!turbinia!abair -- Don "Truck" Lewis Harris Semiconductor Internet (if you're lucky): del@semi.harris-atd.com PO Box 883 MS 62A-028 Internet (if not): del%thrush@trantor.harris-atd.com Melbourne, FL 32901 UUCP (works): rutgers!soleil!thrush!del Phone: (407) 729-5205