Xref: utzoo comp.lsi:885 comp.lsi.cad:323
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!cs.utexas.edu!oakhill!dale
From: dale@oakhill.UUCP (Dale Stevens)
Newsgroups: comp.lsi,comp.lsi.cad
Subject: Re: Need help on Silos input commands ...
Message-ID: <2649@sioux.oakhill.UUCP>
Date: 21 Nov 89 16:21:09 GMT
References: <10648@venera.isi.edu> <ABAIR.89Nov21020934@turbinia.oakhill.uucp>
Reply-To: dale@sioux.UUCP (Dale Stevens)
Distribution: usa
Organization: Motorola Inc., Austin, Texas
Lines: 15

In article <ABAIR.89Nov21020934@turbinia.oakhill.uucp> abair@turbinia.oakhill.uucp (Alan Bair) writes:
>
>   .CLKIN .CLK 0 S1 500 S0 3000 S1 3500 S0 .REP 500
>The signal CLKIN(I don't think that 1st "." should be there) is driven by
>the source with the described waveform.  The waveform is defined by pairs
>of TIME and Strength/Level descriptions.  The .REP 500 indicates that the
>pattern is to be repeated 500 times.  I can't remember if the entire pattern
>is repeated or just part of the sequence is used.
>
The way I remember it is that the .REP 500 causes the clock to loop back
to time 500.

-- 
----
Dale Stevens.  Motorola Inc.  cs.utexas.edu!oakhill!apache!dale