Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!cs.utexas.edu!tut.cis.ohio-state.edu!rutgers!att!dptg!ulysses!nsscb!ameyer
From: ameyer@nsscb.UUCP (Andy Meyer)
Newsgroups: comp.os.cpm
Subject: Re: Anyone running UUCP201 yet?!
Summary: That's one.
Keywords: UUCP201 QTERM
Message-ID: <1088@nsscb.UUCP>
Date: 25 Nov 89 19:14:24 GMT
References: <1073@nsscb.UUCP> <2109@sactoh0.UUCP>
Reply-To: ameyer@nsscb.UUCP (Andy Meyer)
Distribution: usa
Organization: AT&T NSSC  S. Plainfield, NJ
Lines: 29

In article <2109@sactoh0.UUCP> ianj@sactoh0.UUCP (Ian R. Justman) writes:
> In article <1073@nsscb.UUCP>, ameyer@nsscb.UUCP (Andy Meyer) writes:
> > 
> > At this point, the documentation says to type:
> > SUBMIT B:ALL
> > at the A prompt. Well, I've done that, and made sure it's the SUBMIT.COM that
> > came out of the UUCP201.LBR, and all I get is what seems to be the DRI SUBMIT
> > complaining that there's no input file! What gives?
> 
> I have the exact same problem on my system, only I forgot to modify
> my tcap.z file (which shouldn't be too hard to do, since I already
> have QTERM working on my system).  Evidently, the file ALL.SUB file
> is missing from the library.  I too need it.

I can't believe Ian and I are the only ones trying to get this to work?!

Also there is mention of a QTERM 4.2 (with a larger patch area) -
does anyone have it? One of my oddball machines required that I write
a received character interrupt routine, and unfortunately it's bigger
that the 4.1d patch area.

(David, are you out there somewhere?)

Andy

    ==--      Andreas Meyer  N2FYE
  -====---    AT&T National Systems Support Center
  --==----    uucp: ..!rutgers!sunybcs!nsscb!ameyer
    ----      or: ameyer%nsscb@sunybcs.cs.buffalo.edu