Xref: utzoo comp.sys.ibm.pc:38604 comp.sources.wanted:9510
Path: utzoo!censor!isgtec!bmw
From: bmw@isgtec.UUCP (Bruce Walker)
Newsgroups: comp.sys.ibm.pc,comp.sources.wanted
Subject: Needed: Quadboard clock s/w
Keywords: clock, wanted
Message-ID: <219@isgtec.UUCP>
Date: 21 Nov 89 13:57:19 GMT
Reply-To: bmw@isgtec.UUCP (Bruce Walker)
Followup-To: comp.sys.ibm.pc
Distribution: world
Organization: ISG Technologies Inc., Mississauga, Ontario
Lines: 25

I have a Quadram ``Quadboard''.  This is a board with 384K RAM, async serial,
game port and clock.  I need to install it in a PC I'm putting together but
of course the software and manual were lost long ago.

I have figured out how to set the jumpers for the async, I don't care about
the games port -- BUT -- I can't do anything with the clock, and that is
the most important part! :-)

If anyone having the Quadram clock software would be willing to mail me
the uuencoded executable, I would be enormously pleased.  Thanks!

--
More info: The clock hardware is an MSM5832 connected to an 8255.  In
addition, there are 3 jumper plugs arranged like this:

      H3         H2         H1
    ____          ____       ____
    o  o  o    o  o  o    o  o  o

I know that H2 selects between COM1: and COM2: but the other two are a
mystery to me.
-- 
Bruce Walker                          ...uunet!mnetor!lsuc!isgtec!bmw
"Just say, ``No!'' to bugs."                        isgtec!bmw@censor
ISG Technologies Inc. 3030 Orlando Dr. Mississauga. Ont. Can. L4V 1S8