Path: utzoo!attcan!uunet!samsung!shadooby!netnews.engin.umich.edu!caen.engin.umich.edu!beh
From: beh@caen.engin.umich.edu (Bob Hruska)
Newsgroups: comp.sys.amiga
Subject: Re: VLT 4.226 and XPRzmodem Problems
Message-ID: <46b7deb9.b764@roup.engin.umich.edu>
Date: 8 Nov 89 19:03:00 GMT
References: <8911071519.AA25367@decwrl.dec.com>
Organization: U of M Engineering, Ann Arbor, Mich.
Lines: 23

From article <8911071519.AA25367@decwrl.dec.com>, by macdonald@dickns.dec.com (Paul MacDonald, CUP/ASG, 223-3439, PKO3-1/W30):
> 
> I have encountered a problem with V4.226 VLT and V2.0 XPRzmodem.
> When attempted to upload a file, the upload fails and a "Skip
> command detected" message is displayed. This happens on approximately
> 25% of my attempted transfers. Any idea what the cause of this might be?
     
I haven't had this problem.

> Also, in VLT, if I do a zmodem transfer and then do a kermit or xmodem
> transfer, the transfer status box does not properly indicate the
> transfer protocol in use.

But this happens to me all the time.

While I'm at it, I might as well make another plea fro VLT jr.  I can't find it anywhere,
and I'm not on BIX.

-- 
Bob Hruska   University of Michigan Computer Aided Engineering Network (CAEN)

INTERNET: beh@caen.engin.umich.edu
    UUCP: {umix|ucbvax|uunet}!caen.engin.umich.edu!beh