Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!ucsd!swrinde!cs.utexas.edu!uunet!ncrlnk!ncr-sd!noel!greg
From: greg@noel.CTS.COM (J. Gregory Noel)
Newsgroups: comp.sys.amiga
Subject: Re: Microbotics and Maxtor
Message-ID: <0493.AA0493@noel>
Date: 19 Nov 89 02:43:15 GMT
References: <8911180603.AA17118@jade.berkeley.edu> <239@estinc.UUCP>
Lines: 12

Fred Fish (fnf@estinc.UUCP) writes:
>It's a long shot, but just in case...   I once had a problem with 
>the system guru'ing when I did a binddrivers.  It turns out that I
>had two different versions of the Microbotics hardframe driver in
>the expansion drawer.  ....

I just checked -- there's only one copy of the driver in my Expansion drawer,
so that's not the problem with the 2090 hanging in BindDrivers.  (I've tried
a number of different driver versions, so it was a distinct possibility!)
It's something for Jonathan to check on his configuration, though...
-- 
J. Gregory Noel, UNIX Guru         greg@noel.cts.com  or  greg@noel.uucp