Xref: utzoo comp.sys.amiga.tech:8401 comp.sys.amiga:44390
Path: utzoo!attcan!uunet!aplcen!samsung!cs.utexas.edu!wuarchive!usc!apple!fox!portal!cup.portal.com!Doug_B_Erdely
From: Doug_B_Erdely@cup.portal.com
Newsgroups: comp.sys.amiga.tech,comp.sys.amiga
Subject: Re: Problems with Maxtor drives (merged threads)
Message-ID: <24455@cup.portal.com>
Date: 25 Nov 89 04:28:40 GMT
References: <24338@cup.portal.com> <4988@cbnewsc.ATT.COM>
Distribution: na
Organization: The Portal System (TM)
Lines: 9

The termination packs are located on the pc board right near where the SCSI
cable connects. If you have more than one drive on the system, you should
take the termination packs off. If the Maxtor is the only one, then the
termination packs should be on. The last SCSI device SHOULD be the only
unit with the termination pack.

	- Doug -

Doug_B_Erdely@Cup.Portal.Com