Path: utzoo!attcan!uunet!aplcen!samsung!gem.mps.ohio-state.edu!tut.cis.ohio-state.edu!pt.cs.cmu.edu!rochester!rit!ultb!clf3678
From: clf3678@ultb.UUCP (C.L. Freemesser)
Newsgroups: comp.sys.atari.8bit
Subject: Re: Avatex 1200hc driver and BobTerm
Summary: BobTerm
Message-ID: <1624@ultb.UUCP>
Date: 17 Nov 89 02:53:10 GMT
References: <3353@vax1.tcd.ie> <23990@cup.portal.com> <1025@uwm.edu> <24083@cup.portal.com> <1428@mrsvr.UUCP>
Reply-To: clf3678@ultb.UUCP (C.L. Freemesser)
Organization: Rochester Institute of Technology, Information Systems
Lines: 22

In article <1428@mrsvr.UUCP> krieg@jupiter.UUCP (Andrew Krieg) writes:
>The software was included in my P:R: connector's box, but it wouldn't go.  I
>also tried BobTerm (which everyone tells me is the best) but it also would not
>work.  I have managed to get DeTerm to work.  The Ledbetter program has a built

When using the 850 interface or P:R Connection, delete the file called
RS232.COM from your BobTerm disk.

The program has many different drivers for different modems.  You choose
the driver you need and rename it RS232.COM.  That way, you can use
BobTerm with any modem on the face of the planet.  However, both the 850
and P:R have drivers in ROM.  By removing the RS232.COM file, it tells
the program you have such an interface, and gets the handler from it.

If you have any more trouble, let me know and I'll tell Bob Puff (he
lives down the road from me).

Chris Freemesser, Rochester Institute of Technology :BITNET:%clf3678@RITVAX
    |||        ____________                         :GEnie: C.FREEMESSER
    |||       /___    /          (and 8-bit too!)   :USENET: Don't bother, 
   / | \   ______/   /                              :        it doesn't work
Call the A.C.O.R.N BBS (716)436-3078, 300/1200 baud :<-or my BBS