Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!mcsun!ukc!harrier.ukc.ac.uk!gos.ukc.ac.uk!shc1
From: shc1@ukc.ac.uk (S.H.Cogheil)
Newsgroups: comp.sys.atari.st
Subject: Wanted Info on SCSI HARD DRIVE interfacing !!!
Message-ID: <2608@gos.ukc.ac.uk>
Date: 23 Nov 89 17:34:34 GMT
Reply-To: shc1@ukc.ac.uk (S.H.Cogheil)
Organization: Computing Lab, University of Kent at Canterbury, UK.
Lines: 22

Recently I acquired through various sources 

	1 ICD HOST ADAPTER
	1 Western Digital (WD383R) 3.5" 30mb RLL HARD DRIVE
	1 Western Digital (WD1004-27x) 8-bit RLL Controller card (XT Compatible)

Now my problem is that I wish to get these things going together,
what I know is that I could buy another controller board. i.e ADAPTEC or OMTI
However what I  want to know is...

	Is there such a thing as a IBM XT(controller) to SCSI convertor ?
	( If so where may I get one ) UK ONLY.

	Is there any info on SCSI pinouts ?

	Is there any info on the WD1004-27x pinouts ?

All replies will be welcomed with open EARS ...

p.s Thanks to all those who replied to my request for DIY memory upgrade info.

Uncle Sam.