Xref: utzoo comp.unix.i386:1326 comp.sys.att:8078
Path: utzoo!attcan!uunet!virtech!cpcahil
From: cpcahil@virtech.uucp (Conor P. Cahill)
Newsgroups: comp.unix.i386,comp.sys.att
Subject: Re: Error messages from Bell Tech ACE I/O card on AT&T 6386E
Keywords: Bell Tech, AT&T 6386E, UNIX Sys V/386
Message-ID: <1989Nov21.005404.27983@virtech.uucp>
Date: 21 Nov 89 00:54:04 GMT
References: <5953@cbnewsh.ATT.COM>
Organization: Virtual Technologies Inc.
Lines: 23

In article <5953@cbnewsh.ATT.COM>, mrb1@cbnewsh.ATT.COM (maurice.r.baker) writes:
> ACE: Card 0:  req before init, cmd ??
> 
> The ace/adload process appeared to be running just fine, as least as far as
> I could tell from a "ps -ef".  Rebooting the system, and restarting the
> app. cleared the problem.  I have seen this on two of our systems running
> identical software.

I don't have an ACE card, but I do have an ICC card.  Every once in a while 
something similar happens (sometimes the ports just lock up).  I use the 
idebug command (in the same directory as the downloader) to reset the card
and it works fine.  Maybe there is an ace/adebug that has the same capabilities.

There was no documentation for the program, but a ? (or maybe "help") got 
a list of the commands available.

Good luck.

-- 
+-----------------------------------------------------------------------+
| Conor P. Cahill     uunet!virtech!cpcahil      	703-430-9247	!
| Virtual Technologies Inc.,    P. O. Box 876,   Sterling, VA 22170     |
+-----------------------------------------------------------------------+