Path: utzoo!yunexus!ists!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!cs.dal.ca!dal1!mdinn
From: mdinn@ac.dal.ca
Newsgroups: comp.sys.cbm
Subject: Re: Desterm 128
Message-ID: <945@ac.dal.ca>
Date: 18 Nov 89 07:36:56 GMT
Article-I.D.: ac.945
References: <13190@s.ms.uky.edu> <46400044@uxf.cso.uiuc.edu>
Lines: 15
Organisation: Dalhousie University, Halifax, Nova Scotia, Canada

> /* Written  8:21 pm  Nov  9, 1989 by simon@ms.uky.edu in uxf.cso.uiuc.edu:comp.sys.cbm */
> /* ---------- "Desterm 128" ---------- */
> Does anyone know of a good monitor that can handle the 50 line mode used
> in DesTerm-128?  I tried it on a $600 MultiSync that I use for my AT, and
> it jittered all over the place (and it has a _good_ cable!)
 
Suprisingly, I've found my best results on an Apple /// monitor. It's a
green-screen monitor, and doesn't flicker (well, not much, anyway). Also, the
VDC doesn't go to 4 pixels per character, I believe it goes to interlace mode
(yes, I believe it does support interlacing). 
 
 Hope this helps!
 
 Michael Dinn
 MDINN@AC.DAL.CA