Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!snorkelwacker!apple!sun-barr!rutgers!att!cbnews!ewm
From: ewm@cbnews.ATT.COM (edward.w.mcfarland)
Newsgroups: comp.sys.cbm
Subject: daisy wheel printer driver for Geos
Message-ID: <11726@cbnews.ATT.COM>
Date: 27 Nov 89 02:52:22 GMT
Reply-To: ewm@cbnews.ATT.COM (edward.w.mcfarland,54264,mv,30002w3,508 960 6202)
Organization: AT&T Bell Laboratories
Lines: 15


 
     As a new owner of Geos I am searching for a printer driver for my
Axiom Elite 5 daisy wheel printer. I subscribe to QLink and there doesn't
seem to be a driver that I can download from there. 
This printer is a Silver Reed Exp 400 that Axiom bought and put a C= com-
patible interface in, so all you do is plug the printer into the C= serial
buss and you're ready to go, if you have the correct driver.
     I seem to recall seeing someone post to this newsgroup that they had
a "daisy wheel" printer driver for Geos. Any leads on tracking this down
or suggestions as to how I can come up with my own driver are greatly 
appreciated.


     Ed McFarland          ewm@mvusa.ATT.COM