Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!zephyr.ens.tek.com!tektronix!gvgpsa!gvgpvd!andyp
From: andyp@gvgpvd.GVG.TEK.COM (Andy Peterman)
Newsgroups: comp.sys.mac.programmer
Subject: Re: Serial port question
Message-ID: <1332@gvgpvd.GVG.TEK.COM>
Date: 18 Nov 89 00:14:34 GMT
References: <1989Nov16.190032.13720@aucs.uucp>
Reply-To: andyp@gvgpvd.GVG.TEK.COM (Andy Peterman)
Distribution: na
Organization: Grass Valley Group, Inc.; PVD
Lines: 15

In article <1989Nov16.190032.13720@aucs.uucp> peter@aucs.uucp (Peter Steele) writes:
>Does anyone know how to initialize the Mac serial driver to send at
>38400 baud? The contants are available to initalize it to 57600 and
>19200 baud but not 38400. Any reason why? I think that Microphone can
>send at 38400 so its probably possible.

I always add the line:

	#define baud38400 1

to the Serial.h file supplied by Apple. I've never understood why, but
for some reason they leave it out of the header file.  I use this baud
rate quite often and have never had any problems.

	Andy Peterman