Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!munnari.oz.au!basser!metro!ipso!stcns3!dave
From: dave@stcns3.stc.oz.AU (Dave Horsfall)
Newsgroups: comp.dcom.modems
Subject: Re: break condition, framing errors
Message-ID: <2230@stcns3.stc.oz.AU>
Date: 28 Nov 89 01:59:17 GMT
References: <5464@yarra.oz.au> <2221@stcns3.stc.oz.AU>
Reply-To: dave@stcns3.stc.oz.AU (Dave Horsfall)
Organization: Alcatel STC Australia, North Sydney, AUSTRALIA
Lines: 10

In article <2221@stcns3.stc.oz.AU>, I wrote:
| Depending on whether your vendor implements "true" RS-232C, it goes to
| a MARK condition (-ve voltage or 0 volts) for that time.

Etc.  That of course should read "SPACE", not "MARK".  That's what
I get when I'm in a hurry to go home...  Sorry 'bout that.

-- 
Dave Horsfall (VK2KFU),  Alcatel STC Australia,  dave@stcns3.stc.oz.AU
dave%stcns3.stc.oz.AU@uunet.UU.NET,  ...munnari!stcns3.stc.oz.AU!dave


Brought to you by Super Global Mega Corp .com