Path: utzoo!utgpu!watserv1!watmath!att!dptg!ulysses!andante!mit-eddie!wuarchive!zaphod.mps.ohio-state.edu!rpi!crdgw1!uunet!mcsun!ukc!harrier.ukc.ac.uk!zodiac.ukc.ac.uk!fleet!mel
From: mel@fleet.UUCP (mel)
Newsgroups: comp.laser-printers
Subject: Re: Linotronic 300 & PageMaker
Keywords: Re: Linotronic 300 & PageMaker
Message-ID: <51@fleet.UUCP>
Date: 22 Nov 89 12:33:34 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: Fleet Parts & Equipment, Inc.
Lines: 11
Approved: laser-lovers@brillig.umd.edu
To: rex!uunet!comp-laser-printers

In article <8911150344.AA03565@crayola.cs.UMD.EDU> frontah@PAWL.RPI.EDU (David J
 Sotnick) writes:
>I have a two-page document in Pagemaker on the Mac ots all over them. What am I
 doing wrong?
It sounds like you may be using a setting that is to high for your DPI's (Dots
Per Inch).  Try setting it to 150 DPI if your scanner software allows it.  The
HP LaserJet Plus has a variable setting for DPI.  Also be sure you're using
the greyscale setting and not one of the dithering alternatives.

Mel Shear
!rex!fleet!mel


Brought to you by Super Global Mega Corp .com