Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!mcsun!unido!tub!fauern!fauern!immd4.informatik.uni-erlangen.de!dkhusema From: dkhusema@immd4.informatik.uni-erlangen.de (Dirk Husemann) Newsgroups: comp.os.minix Subject: Re: PH, ISBN number Keywords: Which ISBN for 1.3d Message-ID: <617@medusa.informatik.uni-erlangen.de> Date: 28 Nov 89 15:04:39 GMT References: <312@infovax.UUCP> <4628@ast.cs.vu.nl> Organization: CS Department of the University of Erlangen-Nuremberg, West Germany Lines: 27 ast@cs.vu.nl (Andy Tanenbaum) writes: >In article <312@infovax.UUCP> bl@infovax.UUCP (Bj|rn Larsson) writes: >> What is the ISBN number of MINIX 1.3d (?) from P-H >There is an upgrade kit from P-H for $29.95. The ISBN number is: > 0-13-584723-0 >The kit contains the all the sources of 1.3, but not all the binaries. You need >either 1.1 or 1.2 to boot and read in the disks. The upgrade kit also >contains the compiler binaries, which changed from 1.1 to 1.2. Thus if >you have 1.1 or 1.2, this is the package to get. What about MINIX-ST 1.1 to 1.5.0??? >With a little bit of luck, I will post part of 1.5.0 within a week. >Andy Tanenbaum (ast@cs.vu.nl) Dirk Husemann ---------------------- Smile, tomorrow will be worse! ------------------ X.400: RFC822: dkhusema@immd4.informatik.uni-erlangen.de RFC822: dkhusema@immd4.informatik.uni-erlangen.dbp.de [BETTER!FASTER!] UUCP: {pyramid,unido}!fauern!immd4.informatik.uni-erlangen.de!dkhusema -- Beam me up, Scotty, there's no intelligent life down here! -- ------------------- My opinions are mine, mine, mine -------------------