Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!pasteur!helios.ee.lbl.gov!nosc!crash!pro-graphics.cts.com!dak
From: dak@pro-graphics.cts.com (Stephen Datkowitz)
Newsgroups: comp.sys.amiga
Subject: S/A 4D
Message-ID: <774@crash.cts.com>
Date: 27 Nov 89 13:56:12 GMT
Sender: root@crash.cts.com
Lines: 20

For all those you interested in the Sculpt Wavefront connection I posted
earlier, I have located the article I first read it in. From the September
issue of AV Video (a semi-respectable trade magazine in the video community)
Matthew Leeds mentions in his article "Brewing Amiga Solutions":

".....Access Technologies' ACAD Translator converts AutoCAD files to SA4D
files, and Byte by Byte is about to introduce an SA4D-to-Wavefront conversion
module."

I know it doesn't really clear up any questions but the fact that it exsists
in print gives the whole thing a little more credibilty..."I read it in
Rolling Stone so it MUST be true..." or so the joke goes. I'll keep an ear and
eye open for more info hope y'all will do the same.       DAK

_______________________________________________________________________________

    UUCP: crash!pro-graphics!dak             |    ProLine: dak@pro-graphics
InterNet: crash!dak@pro-graphics.cts.com     |    201/469-0049   3/12/2400 Baud
ARPA/DDN: crash!pro-graphics!dak@nosc.mil    |    24 Hrs.        Piscataway, NJ
_______________________________________________________________________________