Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uwm.edu!ux1.cso.uiuc.edu!deimos.cis.ksu.edu!atanasoff!drues
From: drues@atanasoff.cs.iastate.edu (Michael E. Drues)
Newsgroups: comp.sys.amiga
Subject: Re: Amiga 1000 Memory Expansion
Message-ID: <2080@atanasoff.cs.iastate.edu>
Date: 4 Dec 89 23:46:10 GMT
References: <12828@cit-vax.Caltech.Edu> <PORTUESI.89Dec1102003@tweezers.esd.sgi.com>
Distribution: comp.sys.amiga,comp.sys.amiga.tech
Organization: Dept. of Biomedical Engineering, Iowa State Univ.
Lines: 24
Reply-To:drues@atanasoff.cs.iastate.edu

portuesi@tweezers.esd.sgi.com (Michael Portuesi) writes:

>yun-fong> 1.  What's the best (least expensive, easiest) way to expand
>yun-fong> an Amiga 1000 to 1 Meg?

>Depends.  The least expensive is not the easiest.  Probably the least
>expensive method is to get an internal memory expansion, such as the
>Inboard or Spirit.  The easiest is a slap-on-the-side deal like the
>starboard.

Hey, don't forget Minimegs board from M.A.S.T. (also available for
A500).  It's *very* small and simply plugs into expansion slot.  It
will hold up to 2 Mb but can be ordered with 1 Mb (or 512Kb I think).

Incidently, I have both the Minimeg *and* Insider on my A1000 with no
problems (although Insider can be tricky to install).

Mike.

+-----------------------------------------------------------------------+ 
|   //                  Michael Drues                                   |
| \X/     Internet:     drues@atanasoff.cs.iastate.edu                  |
|         Bitnet:       v2.med@isumvs.bitnet                            |
+-----------------------------------------------------------------------+