Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!gem.mps.ohio-state.edu!van-bc!
From: lphillips@lpami.wimsey.bc.ca (Larry Phillips)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Zorro II pinout
Message-ID: <831@lpami.wimsey.bc.ca>
Date: 26 Nov 89 05:24:37 GMT
Lines: 19
Return-Path: <lpami!lphillips>
To: van-bc!rnews

In <3131@hub.UUCP>, dougp@voodoo.ucsb.edu writes:
>I'd like to know what signal is on pin 20 of the 100 pin edge connector
>of the A2000 zorro II buss. I have an expansion chassis for my A1000,
>an the trace which goes to this pin has a gap in it. I am wondering 
>if this gap is intentional, or a mistake in the etching of the PC board.

Pin 20 is listed as -12VDC for the A2000 and B2000, and as No Connection on the
original Zorro bus.

-larry

--
" All I ask of my body is that it carry around my head."
         - Thomas Alva Edison -
+-----------------------------------------------------------------------+ 
|   //   Larry Phillips                                                 |
| \X/    lphillips@lpami.wimsey.bc.ca -or- uunet!van-bc!lpami!lphillips |
|        COMPUSERVE: 76703,4322  -or-  76703.4322@compuserve.com        |
+-----------------------------------------------------------------------+