Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mephisto!prism!fsu!stat!uflorida!mailrus!cs.utexas.edu!usc!apple!oliveb!amiga!cbmvax!daveh
From: daveh@cbmvax.UUCP (Dave Haynie)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Zorro II pinout
Message-ID: <8722@cbmvax.UUCP>
Date: 27 Nov 89 20:57:20 GMT
References: <3131@hub.UUCP>
Distribution: usa
Organization: Commodore Technology, West Chester, PA
Lines: 16

in article <3131@hub.UUCP>, dougp@voodoo.ucsb.edu says:

> I'd like to know what signal is on pin 20 of the 100 pin edge connector
> of the A2000 zorro II buss. 

That's bus, not buss.  Kissing computers can be a shocking experience.

Anyway, pin 20 on the A2000 bus is -12VDC.  All backplanes should provide 
this supply, though I think you'll find only a very small number of 
cards will actually require it.

> Douglas Peale
-- 
Dave Haynie Commodore-Amiga (Systems Engineering) "The Crew That Never Rests"
   {uunet|pyramid|rutgers}!cbmvax!daveh      PLINK: hazy     BIX: hazy
                    Too much of everything is just enough