Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!cica!tut.cis.ohio-state.edu!ucbvax!hplabs!hp-pcd!hpsgpa!plim
From: plim@hpsgpa.HP.COM (Peter Lim)
Newsgroups: comp.sys.ibm.pc
Subject: Re: DesqView
Message-ID: <340041@hpsgpa.HP.COM>
Date: 30 Nov 89 05:25:23 GMT
References: <1403@utkcs2.cs.utk.edu>
Organization: HP Singapore IC Design Ctr
Lines: 28

> 
> 	I am having problems with QEMM-386 and a Tandy 4000.  I am
> unable to load anything into high memory (ie- Mouse driver).  The
> computer has a paradise VGA board, 4 meg memory, and an 80 meg SCSI
> driver with an Adaptec controller.  The DesqView people seem to think
> that the problem is with the controller, but I have no idea.
> 
Did you put the RAM keyword in the DEVICE=QEMM.SYS line in your CONFIG.SYS ?
Otherwise, QEMM-386 will not fill the empty space above 640K with RAM
and naturally LOADHI will not be able to find it. And even if you do
sometimes QEMM-386 can't figure it out properly. In which case, you'll
need to specify RAM=XXXX-YYYY to get QEMM-386 to fill the particular
space.

Hope that helps !


Regards,
Peter Lim.
HP Singapore IC Design Center.

      E-mail address:              plim@hpsgwg.HP.COM
      Snail Mail address:          Peter Lim
                                   Hewlett Packard Singapore,
                                   (ICDS, ICS)
                                   1150, Depot Road,
                                   Singapore   0410.
      Telephone:                   (065)-279-2289