Path: utzoo!utgpu!watserv1!watmath!ria!uwovax!16012_3045 From: 16012_3045@uwovax.uwo.ca Newsgroups: comp.sys.ibm.pc Subject: Re: Procomm Plus Problems Message-ID: <4443.25793ed7@uwovax.uwo.ca> Date: 3 Dec 89 20:42:15 GMT References: <5690@ncrwic.Wichita.NCR.COM> Lines: 23 In article <5690@ncrwic.Wichita.NCR.COM>, mregeste@ncrwic.Wichita.NCR.COM (Mark Regester) writes: > Case 1: > > Autoexec.bat loads network drivers by calling a batch file with: > > command.com /c loadnet.bat > > Loadnet.bat contains several network drivers and netbios emulators. > Procomm Plus is not in the autoexec.bat file. It is executed later > by the user. With these PCs, the "cannot load .DIR file" is displayed. > If the network commands in the loadnet.bat file are copied into > autoexec.bat Procomm Plus does not have any problems. Try: command /e:nnn /c loadnet.bat where nnn is some appropriate number for the environment size. > Mark Regester Information Systems & Services, NCR Peripheral Products Division > NCR:654-8340 > (316)636-8340 <{ece-csc,hubcap,gould,rtech}!ncrcae!ncrwic!m.regester> > FAX:636-8889 <{sdcsvax,cbatt,dcdwest,nosc.ARPA,ihnp4}!ncr-sd!ncrwic!m.regester> -------------------------------------------------------------------------- Bitnet: gomme@uwovax.bitnet gomme@uwovax.uwo.ca Internet: gomme@uwo.ca