Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!usc!apple!sun-barr!decwrl!shlump.nac.dec.com!ddif.enet.dec.com
From: eirikur@ddif.enet.dec.com (Eirikur Hallgrimsson)
Newsgroups: comp.sys.mac.hardware
Subject: Re: MacNifty Audio Digitizer Power Adaptor
Message-ID: <6439@shlump.nac.dec.com>
Date: 28 Nov 89 22:47:16 GMT
Sender: newsdaemon@shlump.nac.dec.com
Organization: Digital Equipment Corporation
Lines: 16

In article <5158@udccvax1.acs.udel.EDU>, erk@vax1.acs.udel.EDU (Erik A Hanson) writes...
> 
>  I purchased the MacNifty Audio Digitizer a very long time ago, and have
>  Somebody suggested that I use the power adaptor from Thunderware's
>ThunderScan, but I would rather take a "safer" route if at all possible (if

Use the Thunderscan adaptor.  It is nifty and safe.  I use it to support an old
Assimilation brand MIDI adaptor.  The T-scan adaptor takes power from the
floppy port (you can still use an external floppy by plugging into the T-scan
adaptor daisy-chain style.  No muss, no fuss, no need for an electrical outlet.
It should work absolutely the same on the SE/30, because the floppy port is the
same.


Eirikur Hallgrimsson
eh@ddif.enet.dec.com