Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!usc!apple!sun-barr!lll-winken!tekbspa!optilink!jones From: jones@optilink.UUCP (Marvin Jones) Newsgroups: comp.sys.mac.hardware Subject: Re: Quantum 105S HD Summary: Unimac mounting kit will do it Message-ID: <2677@optilink.UUCP> Date: 28 Nov 89 21:34:29 GMT References: Distribution: comp Organization: Optilink Corporation, Petaluma, CA Lines: 22 In article , afoiani@nmsu.EDU (Anthony Foiani) writes: > Has anyone had any success/failures/experience in putting a Quantum > 105S HD inside an SE, while keeping both floppies intact? I have seen The Unimac mounting kit provides a universal mounting bracket which can be used in the traditional "stacked disc" method, or can be mounted on top of the upper floppy with the hard disk shifted to the rear to allow clearance of the CRT. The Unimac kit includes driver and utility software, SCSI ribbon cable, power cable, and responsive telephone support if needed. I beleive Unimac is located in So. Cal., but not sure where. This mounting kit can also be had from Hard Disks International in Tempe, AZ (if you dare deal with that bunch!). Hope this helps. Regards, -- Marvin Jones uunet: {pyramid, tekbspa}!optilink!jones Optilink Corp. bell-net: 707-795-9444 X 206 1310 C Redwood Way CI$: 71320,3637 Petaluma, CA 94952