Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!brutus.cs.uiuc.edu!psuvax1!psuvm!sas102 From: SAS102@PSUVM.BITNET (Steven A. Schrader) Newsgroups: comp.sys.mac.hypercard Subject: Re: Dumping a Screen to MacPaint Message-ID: <89338.152400SAS102@PSUVM.BITNET> Date: 4 Dec 89 20:24:00 GMT References: Organization: Penn State University Lines: 30 In article , jk4i+@andrew.cmu.edu (John McCall Kingsley, III) says: > >Hi, > >I hope that there is a simple answer to this question! Is there a way to >dump the >current screen to a Macpaint file using a HyperTalk command, i.e. just >emulating >the comand-shift-3 Mac command? > >Thanks for your help. > >Jack Kingsley Sure, go into the painting tools and select Export to Paint from the File Menu .... If you do not see this then try setting the userlevel to 5 ... ------- Steven A. Schrader (SAS102@Psuvm SAS@Psuarch) _________________________________________________________________________ 227C Computer Building The Pennsylvania State University University Park, Pa. 16802 Phone : (814) 865 - 2160 343 Strouse Ave. State College, Pa. 16803 (814) 237 - 8196