Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!sun.ufnet.ufl.edu!kent
From: kent@sun.ufnet.ufl.edu (Kent Phelps)
Newsgroups: comp.sys.zenith
Subject: EMS and Parodox 3.0
Message-ID: <21333@uflorida.cis.ufl.EDU>
Date: 1 Dec 89 13:47:45 GMT
References: <21332@uflorida.cis.ufl.EDU>
Sender: news@uflorida.cis.ufl.EDU
Reply-To: kent@sun.ufnet.ufl.edu (Kent Phelps)
Organization: UFNET
Lines: 18

Another question in 386's.  I've run into a problem with the 386/16's.  When
I have the extra RAM on the 1 Meg RAM card configured as EMS Parodox 3.0 hangs
immediately.  I have upgraded the EMM driver to Ver 3.30.15 but it doesn't
make any difference.  One option suggested was to use QEMM with all the RAM
configure as extended.

Question: Does QEMM see the extra 256k on the base 1 Meg card that only
ZDS's EMM.SYS seems to be able to find.  If not are there any other programs
that will.  So far the only way I have been able to get at that memory is
with EMM.SYS.

Again thanx in advance.


--
     Kent Phelps        | Internet:  kent@sun.ufnet.ufl.edu
 University of Florida  | UUCP:  ... ????
 Digital Design Facility| Phone: 904-335-8322