Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!wuarchive!decwrl!shelby!daemon From: TeXhax@cs.washington.edu (TeXhax Digest) Newsgroups: comp.text Subject: TeXhax Digest V89 #105 Message-ID: <885@shelby.Stanford.EDU> Date: 29 Nov 89 03:24:52 GMT Sender: daemon@shelby.Stanford.EDU Lines: 529 TeXhax Digest Monday, November 27, 1989 Volume 89 : Issue 105 Moderators: Tiina Modisett and Pierre MacKay %%% The TeXhax digest is brought to you as a service of the TeX Users Group %%% %%% in cooperation with the UnixTeX distribution service at the %%% %%% University of Washington %%% Today's Topics: Mini-indices in C&T Part B/D Tib with \input ability Printing TeX documents on a Digital PrintServer 40 BibTeX problems under VMS HP 9000 Question Problem with TeX-XeT installation Help needed setting up TeX Need Write-white PK font files Explanation of PXL, PK font magnifications Chinese MetaFont? A (let's say) feature of 'ifx' 2 TeX puzzles Questions about the labrea distribution ------------------------------------------------------------------------ Date: Wed, 15 Nov 89 21:00:06 SET From: Peter Sawatzki Subject: Mini-indices in C&T Part B/D Keywords: TeX, mini-indices I am wondering how DEK has made the mini-indices in Computers&Typesetting Part B and D ? Can anyone help ? Peter Peter Sawatzki ------------------------------------------------------------------------------- Date: Tue, 14 Nov 89 14:31:29 EST From: jsv@cs.brown.edu Subject: Tib with \input ability Keywords: Tib Does anyone have info about versions of the Tib bibliography preprocessor that are smart enough to process \input statements correctly? Tib is really nice to use, but it can be a mess when the TeX document is broken up into several TeX files. Info would be greatly appreciated. Prof. Jeff Vitter email: jsv@cs.brown.edu Dept. of Computer Science phone: (401) 863-7646 Brown University FAX: (401) 863-7657 Providence, R.I. 02912-1910 home: (401) 831-6836 ------------------------------------------------------------------------- Date: Tue, 14 Nov 89 13:38:43 EDT From: WAS@UACSC1.ALBANY.EDU Subject: Printing TeX documents on a Digital PrintServer 40 Keywords: TeX, Digital PrintServer The Computing Services Center at the University at Albany has a Digital PrintServer 40 laser printer and the Math department has an LN03R. Much of the TeX output from these printers is of poor print quality. The problem stems from the fine strokes of many of the characters in the CM typefaces. The fine strokes tend to break up. We have no trouble with typefaces that are heavier in weight such as the bold faces. I am told that output from an Apple LaserWriter does not have this problem, although I have not seen the output. Has anyone else experienced this problem? Does anyone have a solution? Bill Schwarz ---------------------------------------------------------------------- Date: Tue, 14 Nov 89 12:09:24 -0500 From: paules@phoenix.Princeton.EDU (Granville E Paules) Subject: BibTeX problems under VMS Keywords: BibTeX, VMS Has anyone running the DECUS distribution of BibTeX v 0.99c for VAX/VMS experienced any problems and if so has a fix been posted? I am successfully running BibTeX v 0.98i under BSD Unix and the uTeX version on PC. The error issued is encountered for every entry in a bib database with the message "string" is a literal, not a function for entry "entry" while executing---line 729 of file plain.bst where string is the field and entry is the entry. Refer help to paules@phoenix.princeton.edu Skip Paules ---------------------------------------------------------------------------- Date: 14 NOV 89 09:43:41 From: EJONES%TUNS.CA@UWAVM.ACS.WASHINGTON.EDU Subject: HP 9000 Question Keywords: HP 9000 Hi, We are about to install an HP 9000 835S, running HP UX, here at TUNS and would like to run TeX/LaTeX on it. Is there a supported version of TeX out there for this machine... If not where could I get a "generic" version of TeX... TeX written in "C" I guess. Has anyone installed Unix TeX on this machine. Also, we intend to use the HP LaserJet II as the output device. Arbortext makes a driver for this printer that runs on the HP 9000 300, but says it doesn't run on the 835S, nor does their version of TeX. Any information that could be provided, would be greatly appreciated. Thanks, Ed Jones Technical University of Nova Scotia EJONES@TUNS.CA or EJONES@TUNS.BITNET ------------------------------------------------------------------------------- Date: Thu, 2 Nov 89 12:40:39 +0200 From: Rama Porat Subject: Problem with TeX-XeT installation Keywords: TeX-XeT Can anyone help me finding a solution to the following problems which I have encountered while installing tex-xet-- 1. I need something like \font\somename=\fontname\font scaled \magstep1 where \fontname\font will be expanded into the name of the currently used font's file name. It does not work; if, for example, the current font is \rm, I get the message font cmr10scaled not loadable. I have tried \fontname\font\ or \fontname\font{ } but nothing works. 2. In order to install a Hebrew tex-xet, I use Knuth's suggestion and specify \everypar{\kern-\parindent\beginR\indent} this inserts the right indentation in the right margin, and reverses the text of each paragraph. The problem is the LaTeX changes \everypar, so that in certain environments, like, for example \section, my specification of \everypar is destroyed. I have tried to modify the file latex.tex, so that my \everypar will be kept, but with no success. Thanx for help! Rama. rama@shum.huji.ac.il ------------------------------------------------------------------------------- Date: Tue, 14 Nov 89 18:11 CST From: Computer Addict! Subject: Help needed setting up TeX Keywords: TeX, help Hello TeX Hackers: I need some assistance setting up TeX an a couple of systems. The first system is a VAX running VMS. We currently have TeX version 2.0 working but wish to upgrade to the new 3.0 (or 2.9999999...). Anyway, I have been able to find the WEB files at (labrea.stanford.edu) but the CHANGE files are not working with the new WEB files. I'm not really up on WEB and I can't seem to figure out what changes are needed for the new versions. I looked at the file TEX82.BUGS but that didn't make much sense to me either. Does anyone have working .CH files for the new TeX to run under VMS? I'm sure they are out there somewhere but I cannot find them. The next system (UNIX System V-AT) is posing quite a problem. My configuration is: 12 MHz 286 w/ 1Mbyte RAM running... MicroPort System V-AT Release 2.4 I got the TeX files from the FTP server UUNET.UU.NET. Beacause of the 64K segment limitation and no HUGE model in the C compiler, I have had to reduce the array sizes on most all of the files (TANGLE,WEAVE,TEX...) thus causing me to be unable to TANGLE TEX.WEB. I *was* able to convert the TEX.WEB and TEX.CH files to TEX.P on our VAX after compiling CTANGLE under VMS. I then downloaded TEX.P to the AT and WEB2C'd it okay. TeX cc'd okay under Unix (after reducing various array sizes denoted by mem_max, mem_top etc.) and created initex* but now I keep getting the error: "Not enough space" from CSH every time I try to run it. I have been reading my copy of "TeX : The program" to learn more about the memory allocation in TeX but I have found no clue to the "Not enough space" error. From what I understand so far, TeX uses the MEM array for most (all?) of it's memory storage but I thought I reduced the allocation for MEM by reducing the constant mem_max. Needless to say, I'm confused. I know of other implementations (DOSTeX for example) of TeX on iNTEL based machines that have overcome the 64K segment limitation and I'm wondering if anyone out there has worked with porting TeX either to DOS, System V-AT or any other OS that runs on PC-type machines. I welcome any code, ideas or comments from anyone out there. Many thanks in advance... | Ralph Zazula "Computer Addict!" | | Northern Illinois University --- Department of Physics | | NIUHEP::ZAZULA (DecNet/HEPNet) | | ZAZULA%NIUHEP@SEMASSU (BitNet) | | ZAZULA%NIUHEP.DECNET@NCSAA.NCSA.UIUC.EDU (Internet) | |----------------------------------------------------------------------| | Fermi National Accelerator Laboratory --- Experiment E-740 (D0) | | FNAL::ZAZULA (DecNet/HEPNet) | | ZAZULA%FNAL.BITNET@UICUVM.UIC.EDU (BitNet) | -------------------------------------------------------------------------- Date: Fri, 17 Nov 89 17:21:13 EST From: millipore!blu@uunet.UU.NET (Brian Utterback) Subject: Need Write-white PK font files Keywords: fonts, write-white PK font I have a Ricoh engine based laserprinter (Cammington TurboLaser/PS+3) which is a write-white machine. I have the unix-TeX distribution on a SUN 386i and the OZTeX distribution on my Mac. The only trouble is that the only font files I have are for a white-black engine and they look terrible. Does anyone have the fonts for this machine? I do not currently have internet access so it would have to be either a uucp or Email transfer. Thanks in advance. Brian Utterback, Millipore Corporation, 75G Wiggins Ave., Bedford Ma. 01730 UUCP:: uunet!merk!millipore!blu Work:617-275-9200x8245, Home:603-891-2536 -------------------------------------------------------------------------- Date: Wed, 15 Nov 89 12:11:37 EST From: munnari!murdu.ucs.unimelb.EDU.au!rab@uunet.UU.NET (Richard Alan Brown) Subject: Explanation of PXL, PK font magnifications Keywords: fonts, PXL, PK, explanations In TeXhax 2 Nov, Udaya Bhaskar Vemulapati writes: > I want to know at what magnifications that a particular font is > available at our installation. It used to be easy when the system was > using "pxl" files because the extension was the mag factor. Is there any > such quick rule for "pk" as well as "gf" files? I am sure there is but can > someone explain in detail? Thanks in advance. If you ask me, its the PXLs that caused all the trouble in the first place! This is my understanding of the font naming convention (please correct me if I'm wrong!): The PXL pixel files were originally created for a 200 dpi device. TeX magnifications can be specified in one part in 1000, so in TeX a magnification of 1000 corresponds to no magnification at all. Thus, for a magnification of 2, we require a TeX magnification of 2000, and so on. However, I think most of us use laser printers with a resolution of 300dpi. Therefore, this device requires a pixel file corresponding to a 50% size increase on a 200dpi machine: i.e. 1500, because we have more pixels to fill in. This is where the ubiquitous 'magnification 1500' messages come from when we ask for \magstep0 in the TeX source (assuming you have a 300dpi machine). This can get very confusing, and it all results from the unfortunate 'standard' of a 200dpi output device. When the PK fonts were introduced, someone had the foresight to throw all of this out the window. An unmagnified dvi file for a 200dpi device would require files with the extension '.200pk'. The same file would require a '300pk' file on a 300dpi device. Other magnifications merely scale this: a double size output on a 300dpi machine would require a set of '600pk' files. The GF files from MetaFont follow this convention also. e.g. Quick Example using the cmr10 font: 1. 200dpi device: \magstep0 (1000) requires: cmr10.1000pxl or cmr10.200pk or cmr10.200gf \magstep1 (1200) requires: cmr10.1200pxl or cmr10.240pk or cmr10.240gf 2. 300dpi device: \magstep0 (1000) requires: cmr10.1500pxl or cmr10.300pk or cmr10.300gf \magstep1 (1200) requires: cmr10.1800pxl or cmr10.360pk or cmr10.360gf Richard Brown (pbrown@munda.ph.unimelb.edu.au) -------------------------------------------------------------------------- Date: Wed, 15 Nov 89 18:24:11 MST From: thomson@cs.utah.edu Subject: Chinese MetaFont? Keywords: METAFONT, Chinese I read in the TeXBook that a version of the MetaFont program was created for Chinese character fonts. Is this version of MetaFont available? I'm looking for freely available text processing capabilities for Chinese character sets and TeX would be my first choice. I ftp'ed the chinese.tar.Z file from cs.washington.edu. This gives some metafont files that describe the necessary changes to the standard metafont needed in order to work with the larger character tables. Unfortunately I can't decipher the change instructions! Is there anyone out there who is using TeX/MF in such a capacity, or has the necessary instructions for how to modify MF? We have the full sources to TeX/MF here at Utah... I did notice that MF here is MF84 and not MF82; were there major changes to many modules between '82 and '84? Please e-mail me as I don't read TeXhax regularly. Thanks in advance. -- Rich Rich Thomson thomson@cs.utah.edu {bellcore,hplabs,uunet}!utah-cs!thomson "Tyranny, like hell, is not easily conquered; yet we have this consolation with us, that the harder the conflict, the more glorious the triumph. What we obtain too cheap, we esteem too lightly." Thomas Paine, _The Crisis_, Dec. 23rd, 1776 -------------------------------------------------------------------------- Date: Tue, 14 Nov 89 16:31:43 MET From: Victor Eijkhout Subject: A (let's say) feature of 'ifx' Keywords: ifx I know, I know, it's surely not a bug, but please, can someone tell me why it's logical? I was trying to test equality of strings, and I came up with the following macro: \def\testsame#1{\expandafter\ifx\csname#1\endcsname\match \message{the same}\else\message{not the same}\fi} Given this macro, \testsame{match} works, and so does \testsame{nomatch} but what happens with the sequence \testsame{nomatch} \testsame{match} \testsame{nomatch} ?????????????????????????????????????????????????????????? (note that the problem disappears if you define \match) Yours bepuzzledly, Victor Eijkhout Department of Mathematics University of Nijmegen Toernooiveld 5 "Far out in the uncharted 6525 ED Nijmegen, the Netherlands backwaters of the unfash- ionable end of the +31 80 61 3169 western spiral arm (switchboard: 61 1111) of the galaxy" u641000@HNYKUN11.BITNET ---------------------------------------------------------------------------- Date: Thu 16 Nov 89 21:56:24-EST From: Michael Downes Subject: 2 TeX puzzles Keywords: TeX, puzzles Here's a couple of puzzles, for the amusement of you TeXperts out there. These are ones that have come up in my own macro-writing. PUZZLE NO. 1: I was trying to define a macro to access a German Fraktur font in math mode. You should be able to deduce what the problem is from the list file alone. You may very generously assume that the underlying seed of the problem was buried far away in a separate file, and not right under my nose. LIST FILE----------------------------------------------------------------- This is TeX, VAX/VMS Version 2.98a.0 (AMS) (preloaded format=plain 89.5.9) 16 NOV 1989 21:25 **TEST (COM:[MJD]TEST.TEX;170 > \frak=macro: #1->{\fam \frakfam \relax #1}. l.5 Test: $u\in H^1(\show\frak \frak G,Z_2)$. ? ! Use of \frak doesn't match its definition. l.5 Test: $u\in H^1(\show\frak\frak G ,Z_2)$. ? h If you say, e.g., `\def\a1{...}', then you must always put `1' after `\a', since control sequence names are made up of letters only. The macro here has not been followed by the required stuff, so I'm ignoring it. ? x No pages of output. PUZZLE NO. 2: This one demonstrates a subtlety of TeX that I wasn't previously aware of. I eventually found the answer by rereading parts of the TeXbook, but only after first spending an hour or more in the sort of complete bewilderment where you've reached the limit of your knowledge and are reduced to trying one wild guess after another, re-TeXing the file each time and not seeing any rhyme or reason in the results. (This is the penultimate stage of bewilderment; the ultimate stage is when you actually go back to the TeXbook and read the instructions.) The question is: Why did TeX balk when I tried to assign \twotoo to \testcount, but not when assigning \two to \testcount? UCCODE.TEX---------------------------------------------------------------- \newcount\testcount \def\two{2} \uccode`\b=`\2 \edef\next{\def\noexpand\twotoo{b}}\uppercase\expandafter{\next} \show\two \show\twotoo \testcount=\two \showthe\testcount \testcount=\twotoo \showthe\testcount LIST FILE----------------------------------------------------------------- This is TeX, VAX/VMS Version 2.98a.0 (AMS) (preloaded format=plain 89.5.9) 16 NOV 1989 21:40 **UCCODE (COM:[MJD]UCCODE.TEX;7 \testcount=\count25 > \two=macro: ->2. l.5 \show\two \show\twotoo ? > \twotoo=macro: ->2. l.5 \show\two \show\twotoo ? > 2. l.6 \testcount=\two \showthe\testcount ? ! Missing number, treated as zero. 2 l.7 \testcount=\twotoo \showthe\testcount ? h A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ? x No pages of output. ------------------------------------------------------------------------- Date: Tue, 14 Nov 89 08:40:17 -0500 From: ingr!streeter@uunet.uu.net Subject: Questions about the labrea distribution Keywords: archives I don't have ftp access. I got my current TeX, etc. source from the uunet archives, which they tell me is a copy of the unix directory on labrea. There are files in other directories on labrea that are newer than this, but I don't know if I can use them. I have to use web2c. Are there web2c change files for the newer .web sources? How can I tell my friendly ftp intermediary which files to fetch from labrea? How many question can I ask in one posting? thanks, Guy Streeter streeter@ingr.com ...!uunet!ingr!streeter ----------------------------------------------------------------------- %%% Further information about the TeXhax Digest, the TeX %%% Users Group, and the latest software versions is available %%% in every tenth issue of the TeXhax Digest. %%% %%% Concerning subscriptions, address changes, unsubscribing: %%% %%% BITNET: send a one-line mail message to LISTSERV@xxx %%% SUBSCRIBE TEX-L % to subscribe %%% or UNSUBSCRIBE TEX-L %%% %%% Internet: send a similar one line mail message to %%% TeXhax-request@cs.washington.edu %%% JANET users may choose to use %%% texhax-request@uk.ac.nsf %%% All submissions to: TeXhax@cs.washington.edu %%% %%% Back issues available for FTPing as: %%% machine: directory: filename: %%% JUNE.CS.WASHINGTON.EDU TeXhax/TeXhaxyy.nn %%% yy = last two digits of current year %%% nn = issue number %%% %%%\bye %%% End of TeXhax Digest ************************** ------- Brought to you by Super Global Mega Corp .com