Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!apple!ginger.acc.com!anise!pst
From: pst@anise.acc.com (Paul Traina)
Newsgroups: comp.unix.aux
Subject: Re: Need help with 19200 baud Telebit
Message-ID: <1989Nov29.185244.25151@ginger.acc.com>
Date: 29 Nov 89 18:52:44 GMT
References: <1989Nov29.163459.23051@oxtrap.aa.ox.com>
Sender: news@ginger.acc.com (USENET news)
Organization: Advanced Computer Communications, Santa Barbara, California
Lines: 35

I have blazer's on my A/UX machine set at 19.2k without any problem.

Here is my /etc/gettydefs entry for a 19.2k blazer:

19200# EXTA # EXTA HUPCL SANE2 TAB3 # MODEM ~DTR ~FLOW #\r\nlogin: #19200


Here are the modem parameters after an ATZ:

E1 F1 M0 Q0 T V1 X3     Version BA4.00
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006
S10=007 S11=070 S12=050 
S45=255 S47=032 S48=000 S49=000
S50=000 S51=005 S52=002 S53=004 S54=003 S55=000 S56=017 S57=019 S58=000 S59=000
S60=000 S61=030 S62=003 S63=001 S64=000 S65=000 S66=001 S67=000 S68=255 
S90=000 S91=000 S92=000 S95=000 
S100=000 S101=000 S102=000 S104=000 
S110=255 S111=255 S112=001 
S121=000 

I made a special cable to detect hangup transitions -- this cable uses DSR
(which I have programed to drop for 2 seconds after a hangup) instead of DCD
as the carrier detect function.  Then, I have a special getty program
which does some additional programming.

It will send down:
	ATE0
	AT&EE0X1V0S2=128S58=0

Contact me if you want my blazer intelligent getty.
--
Ooh, I just know that something good is going to happen
  And I don't know when
But just saying it could even make it happen,
					-- Kate Bush