Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!brutus.cs.uiuc.edu!apple!motcsd!hpda!hpcuhb!hpindda!huilin
From: huilin@hpindda.HP.COM (Hui-Lin Lim)
Newsgroups: comp.binaries.ibm.pc.d
Subject: Re: 1.2 Meg drive on XT
Message-ID: <35180012@hpindda.HP.COM>
Date: 12 Dec 89 15:58:55 GMT
References: <20556@pasteur.Berkeley.EDU>
Organization: HP Information Networks, Cupertino, CA
Lines: 14

Unless your PC's BIOS supports 1.2M floppies you'll need to get a
new floppy controller which has a ROM on board which provides the
support for the 1.2M drive.

In addition, you have to make sure that you've got the floppy
drives configured correctly so that they aren't clashing and that
the termination resistor pack is only installed on drive B.

Hope this helps

Hui-Lin Lim
ARPA: huilin%hpinddf@hplabs.hp.com
UUCP: {ucbvax,hplabs}!hpinddf!huilin
Phone:  (408)447-2835