Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!brutus.cs.uiuc.edu!apple!motcsd!hpda!hpcuhb!hp-ses!hpcc01!hpccc!steed From: steed@hpccc.HP.COM (Gary Steed) Newsgroups: comp.dcom.modems Subject: Re: Modem help Message-ID: <5830005@hpccc.HP.COM> Date: 4 Dec 89 22:14:26 GMT References: <24674@cup.portal.com> Organization: HP Corp Computing & Services Lines: 40 >I have recently aquired a new modem, and have no information regarding >it, and wonder if someone somewhere knows anything about it. >The modem is a Multi-Tech Systems modem FM-327. It has two ports on the >back: a 'regular' db-25 RS-232C connector, and a db-15 connector. The >15 pin connector throws me for a loop. Theres a cable that plugs into it >that has what looks like a regular RJ-11 phone line plug on the other end. >So it looks like the db-15 to the phone line. Well, after a call to Multi-Tech, I found out that what you have is an old dial modem. Speed (watch out!) 300 Bps. >Plugged into the RS-232C port of my computer (for the record, a Xerox >820-II) doesnt reveal anything at all. I transmit data from the computer >to the RS-232C port, which isnt recived by the modem. In effect, the >modem is dead. >I realize that this isnt your standard run-of-the-mill Hayes AT >compatable modem, and would like to know if this can be used on a >micro (stated above, async port). Make sure your machine is set to 300 Bps async and try it again. They said that it used the Standard Hayes command set. You might try CAPS, as the Hayes modems that I've used wouldn't accept a lower-case "at". (has that changed?) One other thing, A modem that old may require a DAA (Data Access Arrangement) between the modem and the phone line. That's if you even condsider using the beast. If you want anymore information, you can call Multi-Tech at this number; Multi-Tech System, Inc 82 Second Ave S.E. New Brighton, Minnesota. 55112 (612) 631-3550 or (800) 328-9717 Gary Steed Hewlett Packard Corporate Offices