Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!clyde!uunet!samsung!zaphod.mps.ohio-state.edu!wuarchive!mit-eddie!apollo!bowbeer
From: bowbeer@apollo.HP.COM (Joe Bowbeer)
Newsgroups: comp.sys.apollo
Subject: Re: Using the Apollo INLIB feature with X11
Keywords: inlib apollo X11
Message-ID: <473fdd42.20b6d@apollo.HP.COM>
Date: 5 Dec 89 20:02:00 GMT
References: <1170@cernvax.UUCP>
Sender: root@apollo.HP.COM
Reply-To: bowbeer@apollo.HP.COM (Joe Bowbeer)
Organization: Hewlett-Packard Company, Apollo Division; Chelmsford, MA
Lines: 24

In article <1170@cernvax.UUCP> hedman@cernvax.UUCP (fredrik hedman) writes:
>
>Notes on how to use the X libraries through the INLIB facility.
>===============================================================
>
>I have been using the Apollo inlib facilities with the X11, Xaw
>and Xt libraries under 9.7 AEGIS( bsd and sys5 installed); the
>version of X is the version which Apollo calls: Apollo Domain/X11.
>

Thanks for the info about using inlib with the sr9.7 Domain/X11.
That's version 1.0, by the way. You might be interested to know that in
the two following releases, version 1.1(sr10.1) and version 1.2(sr10.2),
the inlib-ing of libX11 is done automatically and does not require any
makefile changes. Version 1.2 also provides inlib-able versions of the
various other x libs. However, since these other x interfaces were/are
still in flux, the inlib-ing is not done automatically; simple makefile
changes are required if you want the other x libs dynamically loaded
instead of bound-in.

--------------------------------------------------------------------------------
| Joe Bowbeer Apollo Computer A Subsidiary of Hewlett-Packard (508) 256-6600   |
| Internet: bowbeer@apollo.com UUCP: {attunix,decvax,mit-eddie}!apollo!bowbeer |
--------------------------------------------------------------------------------