Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!ERENJ.BITNET!MBERNAR From: MBERNAR@ERENJ.BITNET (Marcelino Bernardo) Newsgroups: comp.sys.atari.st Subject: Prototyping board for the ST cartridge port Message-ID: <8912061925.AA15057@ucbvax.Berkeley.EDU> Date: 6 Dec 89 05:14:48 GMT References: Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 16 Ignac A. Kolenko asks if there are prototyping boards available for the ST's cartridge port. In the June 1987 issue of Byte, there was an article by Tim G. Hunkler on building an interface board for the cartridge port. In it, he used a used a board from Douglas Electronics. Proto board Part number 33-DE40 Douglas Electronics 718 Marina Blvd. San Leandro, CA 94577 (415)483-8770 Hopefully this place is still around. Let me know how it works out. Regards, Marcelino Bernardo mbernar@erenj.bitnet