Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!pt.cs.cmu.edu!cadre.dsl.pitt.edu!pitt!cuphub!kar7481
From: kar7481@cuphub.cup.edu (Dan Karbowsky;AtariEliteOfPghPa bbs412-384-5609)
Newsgroups: comp.sys.atari.st
Subject: Re: KERMIT with Uniterm v2.0?
Message-ID: <2240@cuphub.cup.edu>
Date: 7 Dec 89 02:52:05 GMT
References: <8912050802.AA12678@ucbvax.Berkeley.EDU>
Organization: California University of Pennsylvania, California, PA
Lines: 28

In article <8912050802.AA12678@ucbvax.Berkeley.EDU>, AMEIJ@vax.oxford.ac.UK (Jan Ameij) writes:
> I have had lotsa problems transferring binary files with Uniterm kermit, from
> a VAXCluster. The solution seems to be...SET FILE TYPE FIXED on the VAX
> (Kermit-32>) and BINARY on the ST. Both binary -> dozens of errors...
> 
> I don't know why it works, but it does.
> 
> 
> Jan

I am on a VAX-8350 and use kermit-32> also...

I have found that 99.9% of all KERMIT up/downloads will work using UNITERM 2.0d
if you issue a "SET DELAY n" command: whereas; n = number of seconds you think
you'll need to select the SEND/RECV file and go into send/recv mode...

Hope this helps SOMEONE out there....

-- 
 +-----------------------------------------------------------------------------+
 | Dan Karbowsky      kar7481@pitt!cuphub /   S U P P O R T  T H E  S T ! ! !  |
 | 102 Lee Drive      ___________________/Call the ATARI ELITE of PITTSBURGH'S |
 | Belle Vernon, PA  / BBS (Forem-ST,fnet node 19)  at (412) 384-5609 at 300   |
 | 15012   U.S.A.   / thru 19.2k baud 24 hrs./day 7-days/week   Mention this   |
 |	           / message at logon.                                         |
 +-----------------------------------------------------------------------------+

                  JOIN THE REVOLUTION ! ! !