Xref: utzoo comp.sys.att:8246 unix-pc.general:4300
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!samsung!aplcen!haven!umbc3!motteler
From: motteler@umbc3.UMBC.EDU (Howard E. Motteler)
Newsgroups: comp.sys.att,unix-pc.general
Subject: jumpers of 4096 for 3b1?
Keywords: 3b1 unixpc segate 4096
Message-ID: <2609@umbc3.UMBC.EDU>
Date: 10 Dec 89 07:27:06 GMT
Organization: Univ of Maryland Baltimore County
Lines: 17

Does anyone with a seagate 4096 know how the jumpers should
be set for the 3b1?  I have zero documentation on this drive.

There is what I assume is a row of jumper positions between the
flat cable connectors in the back.  There was a jumper on the
3rd pair from the right, which at a guess, is to run as drive C:
on a PC.  But moving this jumper around, and removing it
entirely, I can't get the machine to recognize the drive!

Everything works fine when I swap the old drive back in, and the
drive spins up OK.  Any info will be grealy appreciated.

Thanks,

-- 
Howard E. Motteler       |  Dept. of Computer Science
motteler@umbc3.umbc.edu  |  UMBC, Catonsville, MD 21228