Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!ucsd!ucrmath!xcbw11c From: xcbw11c@ucrmath.UCR.EDU (wayne wallace) Newsgroups: comp.sys.cbm Subject: Re: Q-Link files Keywords: Kermit2.2 vt100-128 Message-ID: <2947@ucrmath.UCR.EDU> Date: 7 Dec 89 18:31:21 GMT References: <29657@genrad.UUCP> Reply-To: xcbw11c@ucrmath.UUCP (wayne wallace) Distribution: usa Organization: University of California, Riverside Lines: 31 In article <29657@genrad.UUCP> pcr@genrad.com (Perry Rothermel) writes: |Could someone please tell me EXACTLY where these 2 files are located on | Q-Link so I can download them. I have looked for both and cannot find | them. I have a C-128D and would like to use these programs. I believe | the Kermit program is compatible with a 128. Is it? |Any help would be appreciated. vt100-128: Well, it's been a while, but (hoping others in the net want to know also) here's what I remember: go to (Q-link) CIN/software from commodore and search by subject or files, whatever works, and it should be there. It was written by Fred Bohen (sp?) and if you try to use "download a specific file" that or Commodore should work for the name of the uploader. As for Kermit V2.2, I haven't looked in Q-link for it, being perfectly satisfied with vt100-128V16.2 (the correct name), which I'm using right now as I type this article in the (tv commercial) "comfort and privacy of my own home." If you really need it, the most reliable way (and less costly!) is to use ftp at maxwell.physics.purdue.edu. If you haven't used ftp before, just Read The Friendly Manual and all will be explained. If not, someone with appropriate knowledge should be available to you. As a last resort, waste some + time in people connection and go to the 'help' room. th-th-th-that's all folks! ******************************************************************************* * Lord Zar,Commander Of All He Surveys (xcbw11c@ucrmath.ucr.edu) * *USNail: 100 Aberdeen Drive Box #737 * * Riverside,CA 92507 * ******************************************************************************* * "The only good Assassin/Paladin is a dead one!" --Me * *******************************************************************************