Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!uunet!dayton.saic.com!fac2
From: fac2@dayton.saic.com (Earle Ake)
Newsgroups: comp.sys.dec
Subject: Re: LN03 printing problems
Message-ID: <861.25861c47@dayton.saic.com>
Date: 13 Dec 89 14:54:15 GMT
References: <89346.101953O04@PSUVM.BITNET>
Organization: Science Applications Intl. Corp., Dayton, Ohio
Lines: 21

In article <89346.101953O04@PSUVM.BITNET>, O04@PSUVM.BITNET (Kevin Maher - Behrend Computer Center) writes:
> We have an LN03 Plus here that's not printing at the edges.  This began
> in late October when a maintenance kit was installed on the right side.
> Now, after another full maintenance kit, both edges are not printing.  Does
> anybody know of anything that we could do here to fix it? (i.e. is there any
> parts that could be cleaned)  Any input will be appreciated.  Thanx in
> advance.

	I have had problems like that.  The problem I was experiencing was 
that something was blocking the delivery of the toner from the hopper to the 
roller.  It may be dirt or something else.  Call DEC.  They can either vacuum 
out the tray (and replace the toner) or they can replace the front drawer 
entirely.  If you have the exact same problems I had, this should do it.

-- 
_____________________________________________________________________________
             ____ ____    ___
Earle Ake   /___ /___/ / /     Science Applications International Corporation
           ____//   / / /__                 Dayton, Ohio
-----------------------------------------------------------------------------
Internet: fac2%dayton.saic.com@uunet.uu.net    uucp: uunet!dayvb!fac2