Path: utzoo!yunexus!ists!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!saturn!ucscg.UCSC.EDU!dstr012
From: dstr012@ucscg.UCSC.EDU (10003012)
Newsgroups: comp.sys.ibm.pc
Subject: Adding expansion slots to old Compaq Portable (HELP!)
Keywords: Compaq
Message-ID: <9753@saturn.ucsc.edu>
Date: 15 Nov 89 11:42:10 GMT
Article-I.D.: saturn.9753
Expires: 15 Dec 89 08:00:00 GMT
Sender: usenet@saturn.ucsc.edu
Reply-To: dstr012@ucscg.UCSC.EDU (Kevin Kahl)
Organization: University of California, Santa Cruz; CATS
Lines: 23

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To all of you engineering types...from a future engineer...

      I have an old Compaq Portable computer that is crammed
with add-in cards!  I need to add more.  I am thinking maybe
I can just buy ribbon cable and run it to an external board
that has more expansion slots.

      I know that I will need to add a new power supply
somewhere.  Questions:

		- Can I actually simply wire more expansion
		  slots to the original set?
		- If so, how and where do I connect the second
		  power supply (i.e. how do I wire it to the
		  extended portion of the I/O channel)

       Any help I can get is welcome!  Please E-mail any responses
as I am a student and have little time to check hundreds of messages
on this news net.  Thanks alot!

					- Kevin Kahl :-)
					  dstr012@ucscg.UCSC.EDU